D-Link DGS-3120-48PC - Page 155

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
151
DGS-3120-24TC:admin#disable ipif_ipv6_link_local_auto newone
Command: disable ipif_ipv6_link_local_auto newone
Success.
DGS-3120-24TC:admin#
12-21 show ipif_ipv6_link_local_auto (EI Mode Only)
Description
This commands is used to display the link local address automatic configuration state.
Format
show ipif_ipv6_link_local_auto {<ipif_name 12>}
Parameters
<ipif_name 12> - (Optional) Enter the Ip interface name used here. This name can be up to 12
characters long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
T o display the link local address automatic configuration state.
DGS-3120-24TC:admin#show ipif_ipv6_link_local_auto
Command: show ipif_ipv6_link_local_auto
IPIF: System Automatic Link Local Address: Disabled
DGS-3120-24TC:admin#