xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
167
DGS-3120-24TC:admin# show authentication ports
Command: show authentication ports
Port Methods Auth Mode Authentication VLAN(s)
---- ------------ ----------- ---------------------
1 None Host-based 1,3,5,9,11,88,16
18,56
2 Any Port-based
3 802.1X_IMPB Host-based
4 None Host-based 2000,2005
5 MAC_IMPB Host-based
6 None Host-based
7 None Host-based 1-20
8 802.1X_IMPB Host-based
9 None Host-based
16-7 enable authorization
Description
This command is used to enable authorization.
Format
enable authorization attributes
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
This example sets authorization global state enabled:
DGS-3120-24TC:admin# enable authorization attributes
Command: enable authorization attributes
Success.
DGS-3120-24TC:admin#
16-8 disable authorization
Description
This command is used to disable authorization.
To Next Page
Loading...
