D-Link DGS-3120-48PC - Page 667

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
663
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable SNMP:
DGS-3120-24TC:admin# disable snmp
Command: disable snmp
Success.
DGS-3120-24TC:admin#
72-21 config snmp system_name
Description
This command is used to configure the name for the Switch.
Format
config snmp system_name {<sw_name>}
Parameters
system_name - A maximum of 128 characters is allowed. And NULL string is accepted.
<sw_name>
- (Optional) Enter the system name used here.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the Switch name for “DGS-XXXXS Stackable Switch”:
DGS-3120-24TC:admin# config snmp system_name DGS-XXXXS Stackable Switch
Command: config snmp system_name DGS-XXXXS Stackable Switch
Success.
DGS-3120-24TC:admin#