xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
677
DGS-3120-24TC:admin# show sim neighbor
Command: show sim neighbor
Neighbor Table
Port MAC Address Role
------ ------------------ ---------
23 00-35-26-00-11-99 Commander
23 00-35-26-00-11-91 Member
24 00-35-26-00-11-90 Candidate
Total Entries: 3
DGS-3120-24TC:admin#
73-4 reconfig
Description
This command is used to re-telnet to member.
Format
reconfig {member_id <value 1-32> | exit}
Parameters
member_id - (Optional) Specify the serial number of the member.
<value 1-32> - Enter the serial number of the member here.
exit - (Optional) Specify to exit from the telnet session.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To re-telnet to member:
DGS-3120-24TC:admin# reconfig member_id 1
Command: reconfig member_id 1
DGS-3120-24TC:admin#
Login:
73-5 config sim_group
Description
This command is used to configure group information.
To Next Page
Loading...
