D-Link DGS-3120-48PC - Page 788

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
784
<ipaddr> )
login by console,
there will no IP
information for
logging.
Firmware upgrade was
unsuccessful
[Unit <unitID>,] Firmware upgrade
by console was unsuccessful!
(Username: <username>, IP:
<ipaddr> )
Warning "by console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
Configuration successfully
downloaded
Configuration successfully
downloaded by
console(Username: <username>,
IP: <ipaddr> )
Informational
"by console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
Configuration download
was unsuccessful
Configuration download by
console was unsuccessful!
(Username: <username>, IP:
<ipaddr>)
Warning
"by console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
Configuration successfully
uploaded
Configuration successfully
uploaded by console (Username:
<username>, IP: <ipaddr> )
Informational
"by console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
Configuration upload was
unsuccessful
Configuration upload by console
was unsuccessful! (Username:
<username>, IP: <ipaddr> )
Warning
"by console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
Log message successfully
uploaded
Log message successfully
uploaded by console (Username:
<username>, IP: <ipaddr> )
Informational
"by console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
Log message upload was
unsuccessful
Log message upload by console
was unsuccessful! (Username:
<username>, IP: <ipaddr> )
Warning
"by console" and "IP:
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.