xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
785
Firmware successfully uploaded
by console (Username:
<username>, IP: <ipaddr> )
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
Firmware upload by console was
unsuccessful! (Username:
<username>, IP: <ipaddr> )
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
Port <[unitID:]portNum> link up,
Port <[unitID:]portNum> link down
Unit<UnitID>,MAC:<macaddr> Hot
insertion.
Informational
Unit<UnitID>,MAC:<macaddr> Hot
Firmware upgraded to SLAVE
successfully
(Username:<username>)
Firmware upgraded to SLAVE
unsuccessfully! (Username:
<username>)
Stacking topology
change.
<Stack_TP_TYPE>. Master(Unit
<unitID>, MAC:<macaddr>)
Backup master changed
to master
Backup master changed to
master. Master (Unit: <unitID>)
Informational
Slave changed to master. Master
Hot insert failed, box ID conflict:
Unit <unitID> conflict (MAC:
<macaddr> and MAC: <macaddr>)
[Unit <unitID>,] Successful login
through Console (Username:
<username>)
[Unit <unitID>,] Login failed
through Console (Username:
<username>)
[Unit <unitID>,] Logout through
Console (Username: <username>)
Informational There are no IP and
MAC if login by
console.
Console session timed
out
[Unit <unitID>,] Console session
timed out (Username:
<username>)
Informational There are no IP and
MAC if login by
console.
Successful login through Web
(Username: <username>, IP:
<ipaddr> )