D-Link DGS-3120-48PC - Page 796

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
792
server
<serverIP> (Username:
<username> )
Enable Admin failed
through Telnet due to
AAA server timeout or
improper configuration
Enable Admin failed through
Telnet from <userIP> due to AAA
server timeout or improper
configuration (Username:
<username>)
Warning
Successful Enable Admin
through SSH
authenticated by AAA
server
Successful Enable Admin through
SSH from <userIP> authenticated
by AAA server <serverIP>
(Username: <username> )
Informational
Enable Admin failed
through SSH
authenticated by AAA
server
Enable Admin failed through SSH
from <userIP> authenticated by
AAA server <serverIP>
(Username: <username> )
Warning
Enable Admin failed
through SSH due to AAA
server timeout or
improper configuration
Enable Admin failed through SSH
from <userIP> due to AAA server
timeout or improper configuration
(Username: <username> )
Warning
Port
Security
port security is exceeded
to its maximum learning
size and will not learn any
new address
Port security violation (MAC
address: <macaddr> on port:
<[unitID:]portNum>)
Warning
RADIUS
VID assigned from
RADIUS server after
RADIUS client is
authenticated by RADIUS
server successfully .This
VID will be assigned to
the port and this port will
be the VLAN untagged
port member.
RADIUS server <ipaddr>
assigned VID :<vlanID> to port
<[unitID:]portNum>
(account :<username> )
Informational
Ingress bandwidth
assigned from RADIUS
server after RADIUS
client is authenticated by
RADIUS server
successfully .This Ingress
bandwidth will be
assigned to the port.
RADIUS server <ipaddr>
assigned ingress
bandwith :<ingressBandwidth> to
port <[unitID:]portNum> (account :
<username>)
Informational
Egress bandwidth
assigned from RADIUS
server after RADIUS
client is authenticated by
RADIUS server
successfully .This egress
bandwidth will be
assigned to the port.
RADIUS server <ipaddr>
assigned egress
bandwith :<egressBandwidth> to
port <[unitID:]portNum> (account:
<username>)
Informational
802.1p default priority
assigned from RADIUS
server after RADIUS
client is authenticated by
RADIUS server
successfully. This 802.1p
default priority will be
assigned to the port.
RADIUS server <ipaddr>
assigned 802.1p default
priority:<priority> to port
<[unitID:]portNum> (account :
<username>)
Informational
Failed to assign ACL
profiles/rules from
RADIUS server <ipaddr> assigns
<username> ACL failure at port
Warning