D-Link DGS-3130 Series - Page 467

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
456
Log Description Severity
Unit <id>: The unit ID.
power-descr: Describe the power.
Event description: Power is recovered.
Log Message: Unit <unit-id> <power-descr> back to normal
Parameters description:
Unit <id>: The unit ID.
power-descr: Describe the power.
Critical
Event description: External Alarm state to change.
Log Message: Unit <unit-id> External Alarm Channel <channelID> :<alarmMsg>
Parameters description:
Unit <id>: The unit ID.
channelID: The channel ID.
alarmMsg: The alarm Msg.
Critical
Port
Log Description Severity
Event description: port linkup
Log Message: Port <port> link up, <nway>
Parameters description:
port: Represents the logical port number.
nway: Represents the speed and duplex of link.
Informational
Event description: port linkdown
Log Message: Port <port> link down
Parameters description:
port: Represents the logical port number.
Informational
Port Security
Log Description Severity
Event description: Address full on a port
Log Message: MAC address <mac-address> causes port security violation on
<interface-id>.
Parameters description:
macaddr: The violation MAC address.
interface-id: The interface name.
Warning
Event description: Address full on system
Log Message: Limit on system entry number has been exceeded.
Warning
Reboot Schedule
Log Description Severity
Event description: Tips is about will to reboot Switch within the specified time.
Log Message: Display “Reboot scheduled in 5 minutes” when the countdown equals 5
minutes. Display ”Reboot scheduled in 1 minute” when the countdown equals 1 minute.
Critical