D-Link DGS-3200 SERIES - Show System_Severity

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
107
9-2 show system_severity
Purpose
To show the severity level control for a system.
Format
show system_severity
Description
Use this command to show severity level control for a system.
Parameters
None.
Restrictions
None.
Examples
To show the severity level control for a system:
DGS-3200-10:4#
Command: show system_severity
System Severity Trap : warning
System Severity Log : information
DGS-3200-10:4#