D-Link DGS-3200 SERIES - 10 Command List History Command List

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
108
10 Command List History Command List
?
show command_history
dir
config command_history <value 1-40>
10-1 ?
Purpose
Used to display all commands in the Command Line Interface (CLI).
Format
? {command}
Description
The ? command will display all of the commands available through the Command Line Interface ( CLI ).
Parameters
Parameters Description
command
Specifies the command.
If no command specified, the system will display all commands.
Restrictions
None.
Example
To display all commands:
D G S-3 200-10 :4# ?
Command: ?
..
?
add port_security_entry vlan_name
clear
clear arptable
clear counters