D-Link DGS-3200 SERIES - Show Sntp

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
117
Parameters
Parameters Description
primary
The SNTP primary server IP address.
secondary
The SNTP secondary server IP address.
poll-interval
The polling interval range is between 30 and 99999 seconds.
Restrictions
You must have administrator privileges.
Example
To configure SNTP:
DGS-3200-10:4#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DGS-3200-10:4#
12-2 show sntp
Purpose
Display SNTP configuration.
Format
show sntp
Description
The show sntp command displays the current SNTP time source and configuration.
Parameters
None.
Restrictions
You must have administrator privileges.
Example
To show SNTP: