D-Link DGS-3200 SERIES - 14 Single Ip Management Command List; Enable Sim

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
126
14 Single IP Management Command List
enable sim
disable sim
show sim { [ candidates { <candidate_id 1-100> } | members { <member_id 1-32> } | group
{commander_mac <macaddr>} | neighbor ] }
reconfig { member_id <value 1-32> | exit }
config sim_group [ add <candidate_id 1-100> { <password> } | delete <member_id 1-32> ]
config sim [ [ commander { group_name <groupname 64> } | candidate ] |
dp_interval <sec 30-90> | hold_time <sec 100-255> ]
download sim_ms [ firmware_from_tftp | configuration_from_tftp ] <ipaddr> <path_filename>
{[ members <mslist 1-32> | all ]}
upload sim_ms [configuration_to_tftp | log_to_tftp] <ipaddr> <path_filename> {[ members
<mslist> | all]}
14-1 enable sim
Purpose
Used to enable single IP management.
Format
enable sim
Description
The enable sim command configures the single IP management on the switch as enable.
Parameters
None.
Restrictions
You must have administrator privilege.
Examples
To enable single IP management: