D-Link DGS-3200 SERIES - Disable Stp; Enable Stp

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
149
DGS-3200-10:4# config stp mst_config_id name R&D_BlockG revision_level 1
Commands: config stp mst_config_id name R&D_BlockG revision_level 1
Success.
DGS-3200-10:4#
16-9 enable stp
Purpose
Used to enable STP globally.
Format
enable stp
Description
Although it is possible to modify to allow a user to enable STP per instance, CIST should be enabled first
before enabling other instances. The current chip design dictates that when a user enables the CIST, all
MSTIs will be enabled automatically if FORCE_VERSION is set to MSTP(3) and there is at least one
VLAN mapped to this instance.
Parameters
None.
Restrictions
You must have administrator privilege.
Examples
To enable STP:
DGS-3200-10:4# enable stp
Command: enable stp
Success.
DGS-3200-10:4#
16-10 disable stp
Purpose
Used to disable STP globally.