D-Link DGS-3200 SERIES - Config Vlan Advertisement; Config Gvrp

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
178
20-5 config vlan advertisement
Purpose
Used to enable or disable the VLAN advertisement.
Format
config vlan vlanid <vidlist> advertisement [ enable | disable ]
Description
The config vlan advertisement command enables or disables the VLAN advertisement.
Parameters
Parameters Description
vlan vlanid
The VLAN ID of the VLAN on which you want to configure.
advertisement
Join GVRP or not. If not, the VLAN can’t join dynamically
Restrictions
You must have administrator privileges.
Examples
To enable the VLAN default advertisement:
DGS-3200-10:4#config vlan default advertisement enable
Command: config vlan default advertisement enable
Success.
DGS-3200-10:4#
20-6 config gvrp
Purpose
Used to set the ingress checking status and the sending and receiving of GVRP information.
Format
config gvrp [<portlist> | all] {state [enable | disable] | ingress_checking [enable |
disable] | acceptable_frame [tagged_only | admit_all] pvid<vlanid 1-4094> }
Description
The config gvrp command sets the ingress checking status and the sending and receiving of GVRP
information.