D-Link DGS-3200 SERIES - Packet Size

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
182
DGS-3200-10:4#show vlan ports 1-2
Command: show vlan ports 1-2
Port VID Untagged Tagged Dynamic Forbidden
------ ----- -------- ------ ------- ---------
1 1 X - - -
2 1 X - - -
DGS-3200-10:4#
20-10 show gvrp
Purpose
Used to display the GVRP status for a port list on the switch.
Format
show gvrp {<portlist>}
Description
The show gvrp command displays the GVRP status for a port list on the switch.
Parameters
Parameters Description
portlist
Specifies a range of ports to be displayed.
If no parameter is specified, the system will display GVRP information
for all ports.
Restrictions
None.
Example
To display the 802.1q port setting for ports 1 through 6:
DGS-3200-10:4#show gvrp 1-6
Command: show gvrp 1-6
Global GVRP : Enabled
Port PVID GVRP Ingress Checking Acceptable Frame Type
------ ---- -------- ---------------- ---------------------------
1 2 Enabled Enabled Only VLAN-tagged frames
2 2 Enabled Enabled Only VLAN-tagged frames