D-Link DGS-3200 SERIES - Clear Arptable

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
228
DGS-3200-10:4# show arpentry
Command: show arpentry
ARP Aging Time : 20
Interface IP Address MAC Address Type
------------- --------------- ----------------- ---------------
System 10.0.0.0 FF-FF-FF-FF-FF-FF Local/Broadcast
System 10.90.90.90 00-01-02-03-04-00 Local
System 10.255.255.255 FF-FF-FF-FF-FF-FF Local/Broadcast
Total Entries: 3
DGS-3200-10:4#
30-6 clear arptable
Purpose
Used to remove dynamic entries in the ARP table.
Format
clear arptable
Description
The clear arptable command removes dynamic entries in the ARP table. Static ARP entries are not
affected.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To remove the dynamic entries in the ARP table:
DGS-3200-10:4#clear arptable
Command: clear arptable
Success.
DGS-3200-10:4#