D-Link DGS-3200 SERIES - Disable Mld_Snooping

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
251
Restrictions
You must have administrator privileges.
Example
To enable MLD snooping on the switch:
DGS-3200-10:4#enable mld_snooping
Command: enable mld_snooping
Success.
DGS-3200-10:4#
33-6 disable mld_snooping
Purpose
Used to disable MLD snooping on the switch.
Format
disable mld_snooping
Description
The disable mld_snooping command disables MLD snooping on the switch. MLD snooping can be
disabled only if IPv6 multicast routing is not being used. Disabling MLD snooping allows all MLD and IPv6
multicast traffic to flood within a given IPv6 interface.
Parameters
None.
Restrictions
You must have administrator privileges.
Example
To disable MLD snooping on the switch:
DGS-3200-10:4#disable mld_snooping
Command: disable mld_snooping
Success.
DGS-3200-10:4#