D-Link DGS-3200 SERIES - Config Limited_Multicast_Addr

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
259
Restrictions
user level
Examples
DGS-3200-10:4# show mcast_filter_profile
Command: show mcast_filter_profile
Profile ID Name Multicast Addresses
---- ---------------- ---------------- ----------------
1 MOD 234.1.1.1 - 238.244.244.244
234.1.1.1 - 238.244.244.244
2 customer 224.19.62.34 - 224.19.162.200
Total Entries : 2
DGS-3200-10:4#
34-5 config limited_multicast_addr
Purpose
Used to configure the multicast address filtering function on a port.
Format
config limited_multicast_addr ports [<portlist> |
vlanid <vlanid_list >] {[add | delete ] profile_id
<value 1-24> | access [permit | deny]}
Description
Used to configure the multicast address filtering function on a port or vlan. When there are no profiles
specified with a port or VLAN, the limited function is not effective.
When the function is configured on a port, it limits the multicast group operated by the IGMP snooping
function and layer 3 function. When the function is configured on a vlan, it limits the multicast group
operated by the IGMP layer 3 function.
Parameters
Parameters Description
<portlist>
A range of ports to config the multicast address filtering function.
add
Add a multicast address profile to a port.
delete
Delete a multicast address profile to a port.