D-Link DGS-3200 SERIES - Show 802.1 X User; Config 802.1 X Auth_Protocol

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
269
35-5 show 802.1x user
Purpose
Used to display the 802.1x user.
Format
show 802.1x user
Description
The show 802.1x user command displays the 802.1x user account information.
Parameters
None.
Restrictions
None.
Examples
To display the 802.1x user information
DGS-3200-10:4#show 802.1x user
Command: show 802.1x user
Current Accounts:
UserName Password
--------------- ------------
ctsnow ctsnow
Total Entries : 1
DGS-3200-10:4#
35-6 config 802.1x auth_protocol
Purpose
Used to cofig the 802.1x auth protocol
Format
config 802.1x auth_protocol [local|radius_eap]
Description
The config 802.1x auth_protocol command config the 802.1x auth protocol.