D-Link DGS-3200 SERIES - Show Authen Server_Host

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
311
Parameters
Parameters Description
server_host <ipaddr>
The server host’s IP address.
protocol tacacs
The server host’s authentication protocol.
protocol xtacacs
The server host’s authentication protocol.
protocol tacacs+
The server host’s authentication protocol.
protocol radius
The server host’s authentication protocol.
Restrictions
You must have administrator privilege.
Examples
To delete an authentication server host:
DGS-3200-10:4#delete authen server_host 10.1.1.222 protocol tacacs+
Command: delete authen server_host 10.1.1.222 protocol tacacs+
Success.
DGS-3200-10:4#
36-21 show authen server_host
Purpose
Used to display the authentication server hosts.
Format
show authen server_host
Description
Display the authentication server hosts.
Parameters
None
Restrictions
None
Examples
To display all authentication server hosts: