DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
348
DGS-3200-10:4# show wac user
Command: show wac user
Current Accounts:
Username Vlan name
--------------- ---------
123 default
Success.
DGS-3200-10:4#
40-9 clear wac auth_state
Purpose
Used to the authentication state of a port.
Format
clear wac auth_state ports [all | portlist]
Description
Used to clear the authentication state of a port. The port will return to un-authenticated state. All the timer
associated with the port will be reset.
Parameters
Parameters Description
port
Specifies the list of ports whose WAC state will be cleared.
Restrictions
You must have administrator privileges.
Example
DGS-3200-10:4#
clear wac auth_state ports 1-5
Command:
clear wac auth_state ports 1-5
Success.
DGS-3200-10:4#
To Next Page
Loading...
