D-Link DGS-3200 SERIES - 41 MAC-Based Access Control Command Lists; Enable Mac_Based_Access_Control

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
349
41 MAC-based Access Control Command Lists
enable mac_based_access_control
disable mac_based_access_control
config mac_based_access_control {ports [<portlist> | all] state [enable | disable]|method[local |
radius] | password < passwd 16>| guest_vlan ports <portlist>}
create mac_based_access_control guest_vlan < vlan_name 32>
delete mac_based_access_control guest_vlan
create mac_based_access_control_local mac <macaddr> vlan < vlan_name 32>
config mac_based_access_control_local mac <macaddr> vlan <vlan_name 32>
delete mac_based_access_control_local [mac<macaddr> | vlan<vlan_name 32>]
show mac_based_access_control auth_mac {ports <portlist>}
show mac_based_access_control {port[<portlist> | all]}
show mac_based_access_control_local {[mac<macaddr> | vlan <vlan_name 32>]}
41-1 enable mac_based_access_control
Purpose
Used to enable MAC-Based Access Control.
Format
enable mac_based_access_control
Description
The enable mac_based_access_control command will enable the MAC-Based Access Control function.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To enable MAC-based Access Control:
DGS-3200-10:4# enable mac _ based_access_control
Command: enable mac
_ based_access_control
Success.
DGS-3200-10:4#