D-Link DGS-3200 SERIES - Disable Mac_Based_Access_Control; Config Mac_Based_Access_Control

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
350
41-2 disable mac_based_access_control
Purpose
Used to disable MAC-Based Access Control.
Format
disable mac_based_access_control
Description
The disable mac_based_access_control command will disable the MAC-Based Access Control
function.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To disable MAC-based Acces Control:
DGS-3200-10:4# disable mac _ based_access_control
Command: disable mac _ based_access_control
Success.
DGS-3200-10:4#
41-3 config mac_based_access_control
Purpose
Used to configure the parameter of the MAC-Based Access Control.
Format
config mac_based_access_control {ports [<portlist> | all] state [enable | disable]|method [local |
radius] | password < passwd 16>| guest_vlan ports <portlist>}
Description
The config mac_based_access_control command allows you to configure the MAC-Based Access
Control setting.