D-Link DGS-3200 SERIES - IP Address Assignment

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
36
3-8 show switch
Purpose
Used to display the switch information.
Format
show switch
Description
The show switch command displays the switch information.
Parameters
None.
Restrictions
None.
Example
To display the switch information:
DGS-3200-10:4#show switch
Command: show switch
Device Type : DGS-3200-10 Gigabit Ethernet Switch
MAC Address : 00-00-00-01-02-00
IP Address : 10.90.90.90 (Manual)
VLAN Name : default
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
Boot PROM Version : Build 1.00.B004
Firmware Version : Build 1.10.B021
Hardware Version : A1
Serial Number : P4CK183000001
System Name :
System Location :
System Contact :
Spanning Tree : Disabled
GVRP : Disabled
IGMP Snooping : Disabled
MLD Snooping : Disabled
TELNET : Disabled (TCP 23)