D-Link DGS-3200 SERIES - Config Jwac Redirect

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
365
Restrictions
You must have administrator privileges.
Example
DGS-3200-10:4# config jwac quarantine_server_error_timeout 60
Command: config jwac quarantine_server_error_timeout 60
Success.
DGS-3200-10:4#
42-7 config jwac redirect
Purpose
Used to config redirect destination and delay time before an unauthenticated host is redirected to the
Quarantine Server or JWAC login web page.
Format
config jwac redirect {destination [quarantine_server | jwac_login_page] | delay_time <sec 0-10>}
Description
This command allows you to configure redirect destination and delay time before an unauthenticated host is
redirected to the Quarantine Server or the JWAC login web page. The unit of delay_time is seconds.
0 means no delaying the redirect.
Parameters
Parameters Description
destination
Specifies the destination which the unauthenticated
host will be redirected to.
delay_time
Specifies the time interval after which the
unauthenticated host will be redirected.
Restrictions
You must have administrator privileges.
Example
DGS-3200-10:4# config jwac redirect destination jwac_login_page delay_time 5
Command: config jwac redirect_ destination jwac_login_page delay_time 5
Success.
DGS-3200-10:4#