D-Link DGS-3200 SERIES - Show Jwac Host

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
375
Parameters
None.
Restrictions
None.
Example
DGS-3200-10:4# show jwac
Command: show jwac
State : Enabled
Enabled Ports : 1,9
Virtual IP : 1.1.1.1
Switch HTTP Port : 21212 (HTTP)
UDP Filtering : Enabled
Forcible Logout : Enabled
Redirect State : Enabled
Redirect Delay Time : 3 Seconds
Redirect Destination : Quarantine Server
Quarantine Server : http://172.18.212.147/pcinventory
Q-Server Monitor : Enabled (Running)
Q-Svr Error Timeout : 5 Seconds
Radius Auth-Protocol : PAP
Update Server : 172.18.202.1/32
172.18.202.0/24
10.1.1.0/24
DGS-3200-10:4#
42-20 show jwac host
Purpose
Used to display JWAC client host information.
Format
show jwac host {port [all | <portlist>]} {authenticated | authenticating | blocked}
Description
The show jwac host command allows you to show the JWAC client host information.