DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
377
Parameters
Parameters Description
all
Shows all the ports configured for JWAC.
<portlist>
Specifies a port range to show the configuration of JWAC.
Restrictions
None.
Example
DGS-3200-10:4# show jwac port 1-4
Command: show jwac port 1-4
Port State Max Aging Time Idle Time Block Time
Authenticating (Minutes) (Minutes) (Seconds)
Host
----- -------- --------------- ---------- --------- ----------
1 Enabled 10 Infinite 20 10
2 Disabled 50 60 10 2
3 Enabled 50 1440 Infinite 2
4 Enabled 0 600 30 5
DGS-3200-10:4#
To Next Page
Loading...
