D-Link DGS-3200 SERIES - Enable Dhcp_Relay

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
395
Examples
To configure the DHCP relay option 82:
DGS-3200-10:4#config dhcp_relay option_82 state enable
Command: config dhcp_relay option_82 state enable
Success.
DGS-3200-10:4#config dhcp_relay option_82 check disable
Command: config dhcp_relay option_82 check disable
Success.
DGS-3200-10:4#config dhcp_relay option_82 policy replace
Command: config dhcp_relay option_82 policy replace
Success.
DGS-3200-10:4#
44-5 enable dhcp_relay
Purpose
Used to enable the DHCP relay function on the switch.
Format
enable dhcp_relay
Description
The enable dhcp_relay command enables the DHCP relay function on the switch.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To enable the DHCP relay function.