D-Link DGS-3200 SERIES - Disable Dhcp_Relay; Show Dhcp_Relay

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
396
DGS-3200-10:4#enable dhcp_relay
Command: enable dhcp_relay
Success.
DGS-3200-10:4#
44-6 disable dhcp_relay
Purpose
Used to disable DHCP relay function on the switch.
Format
disable dhcp_relay
Description
The disable dhcp_relay command disables the DHCP relay function on the switch.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To disable the DHCP relay function:
DGS-3200-10:4#disable dhcp_relay
Command: disable dhcp_relay
Success.
DGS-3200-10:4#
44-7 show dhcp_relay
Purpose
Used to display the current DHCP relay configuration.
Format
show dhcp_relay {ipif <ipif_name 12>}