D-Link DGS-3200 SERIES - Page 419

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
419
Description
The show access_profile command displays current access list table.
Parameters
Parameters Description
profile_id
Specifies the index of the access list profile.
Restrictions
None.
Example
To display the current access list table:
DGS-3200-10:4#show access_profile
Command: show access_profile
Access Profile Table
Total Unused Rule Entries:199
Total Used Rule Entries :1
Access Profile ID: 100 Type : Ethernet
================================================================================
Owner : ACL
MASK Option :
VLAN Source MAC Destination MAC 802.1P Ethernet Type
FF-FF-FF-FF-FF-FF 00-00-00-FF-FF-FF
----------- ----------------- ----------------- ------ -------------
================================================================================
Unused Entries: 200
Access Profile ID: 101 Type : IP
================================================================================
Owner : ACL
MASK Option :
VLAN Source IP MASK Dst. IP MASK DSCP ICMP