D-Link DGS-3200 SERIES - Disable Telnet; Enable Web

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
42
Example
To enable Telnet and configure a port number:
DGS-3200-10:4#enable telnet 23
Command: enable telnet 23
Success.
DGS-3200-10:4#
3-15 disable telnet
Purpose
The switch allows you manage the switch via Telnet based management software.
Use the command to disable Telnet.
Format
disable telnet
Description
The disable telnet command disables Telnet.
Parameter
None.
Restrictions
You must have administrator privileges.
Example
To disable Telnet:
DGS-3200-10:4#disable telnet
Command: disable telnet
Success.
DGS-3200-10:4#
3-16 enable web
Purpose
The switch allows you manage the switch via HTTP based management software.