D-Link DGS-3200 SERIES - Page 428

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
428
Format
show cpu access_profile {profile_id <value 1-5>}
Description
The show cpu access_profile command displays current CPU access list table.
Parameters
Parameters Description
profile_id
Specifies the index of an access list profile.
Restrictions
None.
Example
To display the current CPU access list table:
DGS-3200-10:4#show cpu access_profile
Command: show cpu access_profile
CPU Interface Filtering State: Disabled
CPU Interface Access Profile Table
Total Unused Rule Entries:499
Total Used Rule Entries :1
Access Profile ID: 1 Type : Ethernet
================================================================================
MASK Option :
VLAN
-----------
Access ID : 1 Mode: Deny
Ports : 1-3
-----------
default
================================================================================
Unused Entries: 99