D-Link DGS-3200 SERIES - Config Configuration; Show Firmware Information

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
53
DGS-3200-10:4#config firmware image_id 1 boot_up
Command: config firmware image_id 1 boot_up
Success!
DGS-3200-10:4#
4-4 config configuration
Purpose
Used to configure the specific configuration, boot up or active, or to delete it.
Format
config configuration <config_id 1-2> [boot_up | delete | active]
Description
None.
Parameters
Parameters Description
config_id <1-2>
Specifes the serial number of the indicated configuration.
Restrictions
You must have administrator privileges.
Example
To delete the specific configuration:
DGS-3200-10:4#config configuration config_id 2 delete
Command: config configuration config_id 2 delete
Success
DGS-3200-10:4#
4-5 show firmware information
Purpose
Displays the firmware information.
Format
show firmware information