D-Link DGS-3200 SERIES - Show Snmp User; Show Snmp Groups

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
66
6-3 show snmp user
Purpose
Used to display information on each SNMP username in the group username table.
Format
show snmp user
Description
The show snmp user command displays information on each SNMP username in the group
username table.
Parameter
None.
Restrictions
You must have administrator privileges.
Example
DGS-3200-10:4#show snmp user
Command: show snmp user
Username Group Name SNMP Version Auth-Protocol PrivProtocol
--------------- --------------- ------------ ------------- ------------
initial initial V3 None None
Total Entries : 1
DGS-3200-10:4#
6-4 show snmp groups
Purpose
Used to display the names of groups on the switch, and the security model, level, and the status
of the different views.
Format
show snmp groups
Description
The show snmp groups command displays the names of groups on the switch, and the security model,
level, and the status of the different views.