D-Link DGS-3200 SERIES - Delete Snmp Host

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
78
Restrictions
2-level administrator
3-level operator
Example
DGS-3200-10:4#create snmp host 10.48.74.100 v3 noauth_nopriv initial
Command: create snmp host 10.48.74.100 v3 noauth_nopriv initial
Success.
DGS-3200-10:4#
6-16 delete snmp host
Purpose
Used to delete a recipient of an SNMP trap operation.
Format
delete snmp [host <ipaddr> | v6host <ipv6addr>]
Description
The delete snmp host command deletes a recipient of an SNMP trap operation.
Parameters
Parameters Description
ipaddr
The IP address of the recipient for which the traps are targeted.
v6host
Specifies the v6host IP address.
Restrictions
2-level administrator
3-level operator
Example
DGS-3200-10:4#delete snmp host 10.48.74.100
Command: delete snmp host 10.48.74.100
Success.
DGS-3200-10:4#