D-Link DGS-3200 SERIES - Show Utilization

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
94
Parameters
Parameters Description
portlist
Specifies a range of ports to be displayed.
Restrictions
None.
Example
To display the errors of port 3:
DGS-3200-10:4#show error ports 3
Command: show error ports 3
Port number : 3
RX Frames TX Frames
--------- ---------
CRC Error 0 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 0 Excessive Collision 0
Jabber 0 Single Collision 0
Drop Pkts 0 Collision 0
Symbol Error 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
8-3 show utilization
Purpose
Used to display real-time port utilization statistics.
Format
show utilization [ports | cpu]
Description
The show utilization command displays real-time port utilization or CPU statistics.
Parameters
None.