DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
96
Description
The clear counters command clears the switch’s statistics counters.
Parameters
Parameters Description
portlist
Specifies a range of ports to be configured. The beginning and end of
the port list range are separated by a dash.
If no parameter is specified, the system will count all of the ports.
Restrictions
You must have administrator privileges.
Example
To clear the switch’s statistics counters:
DGS-3200-10:4#clear counters ports 7-9
Command: clear counters ports 7-9
Success.
DGS-3200-10:4#
8-5 clear log
Purpose
Used to clear the switch’s history log.
Format
clear log
Description
The clear log command clears the switch’s history log.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To clear the switch’s history log:
To Next Page
Loading...
