D-Link DGS-3200 SERIES - Enable Syslog; Disable Syslog

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
98
8-7 enable syslog
Purpose
Used to enable syslog to send a message.
Format
enable syslog
Description
The enable syslog command enables syslog to send a message.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To enable syslog to send a message:
DGS-3200-10:4#enable syslog
Command: enable syslog
Success
DGS-3200-10:4#
8-8 disable syslog
Purpose
Used to disable syslog sending a message.
Format
disable syslog
Description
The disable syslog command disables syslog sending a message.
Parameters
None.
Restrictions
You must have administrator privileges.