DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
6
Side Panel Description
The system heat vents located on each side dissipate heat. Do not block these openings. Leave at least 6 inches of space at the rear
and sides of the Switch for proper ventilation. Be reminded that without proper heat dissipation and air circulation, system
components might overheat, which could lead to system failure or even severely damage components.
Figure 1- 7. Side Panels of DGS-3200-10
Figure 1- 8. Side Panels of DGS-3200-16
To Next Page
Loading...
