xStack DGS-3400 Series Fast Ethernet Switch
Configure 802.1x Authenticator
To configure the 802.1X authenticator settings, click Configuration > Port Access Entity > Configure 802.1x Authenti-
cator Parameter:
Figure 8- 4. Configure 802.1X Authenticator Parameter window
To view the 802.1X authenticator settings on a different switch in the switch STACK, use the UNIT pull-down menu to
select that switch by its ID number in the switch STACK. To configure the settings by port, click on the hyperlinked port
number under the Port heading, which will display the following table to configure:
Figure 8- 5. 802.1X Authenticator Settings – Modify
This screen allows setting of the following features:
148
To Next Page
Loading...
