D-Link DGS-3620-52P - Page 248

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
238
Figure 5-1136 BGP Neighbor Description Settings window
The fields that can be configured are described below:
Parameter Description
IP Address
Click the radio button and enter the IP address of the BGP speaking neighbor.
Peer Group Name
Click the radio button and use the drop-down menu to select a name of the BGP peer
group.
Action Use the dorp-down menu to select Description or Clear Description. Description
associates a description with a neighbor. By default, the description is not specified.
Clear Description removes the neighbor’s description.
String
Associate a description with a neighbor. By default, the description is not specified.
Click the Apply button to accept the changes made.
BGP Neighbor Password Settings
This window is used to configure BGP neighbor password settings.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Password Settings,
as shown below:
Figure 5-1147 BGP Neighbor Password Settings window
The fields that can be configured are described below:
Parameter Description
IP Address
Click the radio button and enter the IP address of the BGP speaking neighbor.
Peer Group Name
Click the radio button and use the drop-down menu to select a name of the BGP peer
group.
Action Use the dorp-down menu to select Password or Clear Password. Password associates
a password with a neighbor. By default, the password is not specified. Clear Password
removes the neighbor’s password.
String
Associate a password with a neighbor. By default, the password is not specified.
Click the Apply button to accept the changes made.