D-Link DGS-3620-52P - BGP as Path Access Settings

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
246
multihop sub AS. External peers interact with the confederation as if it is a single AS. Each sub AS is fully meshed
within itself and it has connections to other sub ASes within the confederation. The next hop, Multi Exit
Discriminator (MED), and local preference information is preserved throughout the confederation, allowing users to
retain a single Interior Gateway Protocol (IGP) for all the autonomous systems.
To view the following window, click L3 Features > BGP > BGP Confederation Settings, as shown below:
Figure 5-1258 BGP Confederation Settings window
The fields that can be configured are described below:
Parameter Description
Confederation Identifier
(0-65535)
Enter an Autonomous System number which is used to specify a BGP
confederation. If it is set to zero, the BGP confederation number is deleted. By
default, this setting is zero.
Confederation Peer
Action
Use the drop-down menu to select Add or Delete.
Confederation Peer AS
List (1-65535)
Enter one or multiple AS number partitions, each separated by a comma. These are
the Autonomous System numbers for BGP peers that will belong to the
confederation.
Click the Apply button to accept the changes made.
BGP AS Path Access Settings
This window is used to configure an Autonomous System path access list.
To view the following window, click L3 Features > BGP > BGP AS Path Access Settings, as shown below:
Figure 5-1269 BGP AS Path Access Settings window
The fields that can be configured are described below:
Parameter Description
List Name
Enter an Autonomous System path access list name.
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.