xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
341
Figure 8-26 MAC-based Access Control Settings window
The fields that can be configured are described below:
Parameter Description
MAC-based Access
Toggle to globally enable or disable the MAC-based access control function on the
Method
Use this drop-down menu to choose the type of authentication to be used when
authentication MAC addresses on a given port. The user may choose between the
following methods:
Local – Use this method to utilize the locally set MAC address database as the
authenticator for MAC-based access control. This MAC address list can be configured
in the MAC-based access control Local Database Settings window.
RADIUS – Use this method to utilize a remote RADIUS server as the authenticator for
MAC-based access control. Remember, the MAC list must be previously set on the
Use the drop-down menu to enable or disable the use of RADIUS Authorization.
Use the drop-down menu to enable or disable the use of Local Authorization.
Use the drop-down menu to enable or disable log state.
Password Type Use the drop-down menu to select the password type. Available options are Manual
String and Client MAC Address.
Password
Enter the password for the RADIUS server, which is to be used for packets being sent
requesting authentication. The default password is “default”.
Trap State
Use the drop-down menu to enable or disable sending out the trap for MAC-based
Max User (1-4000) Enter the maximum amount of users of the Switch. Tick the No Limit check box to
To Next Page
Loading...
