D-Link DGS-3620-52P - Page 407

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
397
Click the <<Back button to return to the previous window.
Click the Delete All button to remove all the entries listed.
Click the Delete button to remove the specific entry.
Click the Edit button under Manual Binding to see the following window.
Figure 9-18 DHCPv6 Server Manual Binding Settings window
The fields that can be configured are described below:
Parameter Description
IPv6 Address
Enter the IPv6 address to be statically bound to a device.
Client DUID
Enter the DUID of the device to be statically bound to the IPv6 address entered in the
previous field.
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to return to the previous window.
Click the Delete All button to remove all the entries listed.
Click the Delete button to remove the specific entry.
Click the Edit button under Pool to see the following window.
Figure 9-19 DHCPv6 Server Pool Settings window
The fields that can be configured are described below:
Parameter Description
Begin Network
Address
Enter the beginning IPv6 network address of the DHCPv6 pool.
End Network
Address
Enter the ending IPv6 network address of the DHCPv6 pool.
Domain Name
The domain name is used by client when resolving hostnames with DNS.
DNS Server
Enter the DNS server IPv6 address for this pool. Users may specify up to two DNS
server addresses.
Preferred Lifetime
(60-4294967295)
The amount of time (in seconds) that the IPv6 address, based on the specified pool,
remains in preferred state.