D-Link DGS-3620-52P - Upload Log to RCP; Upload Log to HTTP

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
455
IPv6
Click the radio button to enter the TFTP server IPv6 address used.
Domain Name
Click the radio button to enter the domain name.
Destination File
Enter the location and name of the Destination File.
Log Type Select the type of log to be transferred. Selecting the Common Log option here will
upload the common log entries. Selecting the Attack Log option here will upload the log
concerning attacks.
Click Upload to initiate the upload.
Upload Log to RCP
This window allows the user to upload the log file from the Switch to a RCP Server.
Figure 12-17 Upload Log to RCP window
The fields that can be configured are described below:
Parameter Description
RCP Server IP
Enter the RCP Server IP Address used.
User Name
Enter the appropriate Username used.
Destination File
Enter the location and name of the Destination File.
Log Type Select the type of log to be transferred. Selecting the Common Log option here will
upload the common log entries. Selecting the Attack Log option here will upload the log
concerning attacks.
Click Upload to initiate the upload.
Upload Log to HTTP
This window allows the user to upload the log file from the Switch to a computer.
Figure 12-18 Upload Log to HTTP window
The fields that can be configured are described below:
Parameter Description
Log Type Select the type of log to be transferred. Selecting the Common Log option here will
upload the common log entries. Selecting the Attack Log option here will upload the log
concerning attacks.
Click Upload to initiate the upload.