xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
78
Figure 4-20 Super VLAN Settings - Modify window
The fields that can be configured are described below:
Parameter Description
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous page.
Sub VLAN Settings
This window is used to configure the sub VLANs of a super VLAN. A sub VLAN only can belong to one super
VLAN and users cannot bind an IP interface to it. The maximum number of sub VLANs for a super VLAN is 80.
To view the following window, click L2 Features > VLAN > Super VLAN > Sub VLAN Settings, as shown below:
Figure 4-21 Sub VLAN Settings window
The fields that can be configured are described below:
Parameter Description
VLAN Name
Enter the name of the sub VLAN.
VID List
Enter the VLAN ID list of the sub VLAN.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the
IP Range List
link to configure the IP range for the specified sub VLAN.
Click the
IP Range List link to see the following window.
To Next Page
Loading...
