xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
144
state – Specify the interface status.
enable - Specify to enable the interface.
disable - Specify to disable the interface.
gateway - Specify the gateway IP address of the out-of-band management network.
<ipaddr> - Specify the gateway IP address.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the out-of-band management state:
DGS-3620-28SC:admin#config out_band_ipif state disable
Command: config out_band_ipif state disable
Success.
DGS-3620-28SC:admin#
11-8 show out_band_ipif
Description
This command is used to display the current configurations of special out-of-band management
interfaces.
Format
show out_band_ipif
Parameters
None.
Restrictions
None.
Example
To display the configuration of out-of-band management interfaces:
DGS-3620-28SC:admin#show out_band_ipif
Command: show out_band_ipif
Status : Enable
IP Address : 192.168.0.1
Subnet Mask : 255.255.255.0
Gateway : 0.0.0.0
Link Status : LinkDown
To Next Page
Loading...
