D-Link DGS-3620-52P - Page 392

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
387
Parameters
<pool_name 12> - (Optional) Enter the DHCPv6 pool name used here. This name can be up to
12 characters long.
Restrictions
None.
Example
To display the excluded address information:
DGS-3620-28SC:admin# show dhcpv6 excluded_address
Command: show dhcpv6 excluded_address
Pool Name: net100
Range 1
Begin Address: 3000:100:1::1
End Address : 3000:100:1::7
Pool Name: net110
Range 1
Begin Address: 3000:110:1::1
End Address : 3000:110:1::7
Range 2
Begin Address: 3000:110:1::9
End Address : 3000:110:1::9
Range 3
Begin Address: 3000:110:1::11
End Address : 3000:110:1::11
Range 4
Begin Address: 3000:110:1::13
End Address : 3000:110:1::13
Total Entries : 5
DGS-3620-28SC:admin#
25-17 config dhcpv6_server ipif
Description
This command is used to configure the DHCPv6 Server state per interface.
Format
config dhcpv6_server ipif [<ipif_name 12> | all] state [enable | disable]