D-Link DGS-3620-52P - Page 849

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
844
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure all packets which match ACL rule profile ID=1 and access ID=1, and then route to
20.1.1.100:
DGS-3620-28SC:admin#config policy_route name danillo acl profile_id 1 access_id
1 nexthop 20.1.1.100 state enable
Command: config policy_route name danillo acl profile_id 1 access_id 1 nexthop
20.1.1.100 state enable
Success.
DGS-3620-28SC:admin#
75-4 show policy_route
Description
This command is used to display the switch’s current policy route rules.
Format
show policy_route
Parameters
None.
Restrictions
None.
Example
To display the switch’s current policy route rules: