DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
266
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Select VRF button, the following page will appear.
Figure 6-74 OSPFv2 Neighbor Table (Select VRF) Window
Select the VRF entry and click the OK button to use the selected VRF entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following page will appear.
Figure 6-75 OSPFv2 Neighbor Table (Show Detail) Window
Click the Back button to return to the previous window.
OSPFv2 Host Route Settings
This window is used to display and configure the OSPFv2 host route settings. The router will advertise specific host
routes as router LSAs for a stub link.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 Host Route Settings, as shown
below:
To Next Page
Loading...
